Manual Installation Instructions: Embedded for Ricoh SOP Post-Installation Device Configuration

Post-Installation Device Configuration

  1. Click and hold the Print Audit logo
  2. Click User Tools from the home page
  3. Click Machine Features
  4. Click System Settings
  5. Select Administrator Tools

Configure Machine Limit Action

  1. Under the Administrator Tools page 2, select Machine action when limit is reached.

  2. Select Allow Continue Use.

  3. Click Ok.

Enable Tracking

  1. Under the Administrator Tools page 2, select Enhanced Print Volume Use.

  1. Set Tracking Permission to On.

  1. Click Ok.

  1. If Application Authentication Management is shown, set Print Authentication OFF

  1. If Application Authentication Management is not available, set sp_mode 5-420-041 to 0

  1. Restart the device.